willem.com

And... there is light!

My Road Bike's Dynamo Light Transformation

Nov. 1, 2023 -

The darker days are here in the northern hemisphere, and so is the need for good lights on your bike. Although battery powered lights can do the job, you need to keep them charged. I wanted a light system on my road bike that just works. Read along for some light in the darkness!

Continue reading
Supernova E3 Tail Light 2
Supernova E3 Tail Light 2
Using a tweezer I eventually succeeded in guiding the wire through the tiny holes in my front fork
Using a tweezer I eventually succeeded in guiding the wire through the tiny holes in my front fork
Soldering the individual leads together and shrink wrapping them
Soldering the individual leads together and shrink wrapping them
The wire to the rear light goes inside a newly drilled hole in my bike frame - leaving just enough cable for my steering wheel to turn
The wire to the rear light goes inside a newly drilled hole in my bike frame - leaving just enough cable for my steering wheel to turn
Temporarily soldering the actual cables to a copper guiding cable to enable pulling it through the bike frame
Temporarily soldering the actual cables to a copper guiding cable to enable pulling it through the bike frame
The high beam function becomes available from 20KM/h and allows you to illuminate the road much further ahead (if traffic permits)
The high beam function becomes available from 20KM/h and allows you to illuminate the road much further ahead (if traffic permits)

Other stories

all blog posts

Tagged

BikeCreatingMobility

Articles (148)