Biking in the Dark
My Road Bike's Dynamo Light Transformation
Nov. 1, 2023 - Willem L. Middelkoop
The darker days are here in the northern hemisphere, and so is the need for good lights on your bike. Although battery powered lights can do the job, you need to keep them charged. I wanted a light system on my road bike that just works. Read along for some light in the darkness!
Continue reading![Hooray! I pulled it through!](/blog/2023-11-01_and-there-is-light/images/i_14_Hooray-I-pulled-it-through_500px.jpg)
![Temporarily soldering the actual cables to a copper guiding cable to enable pulling it through the bike frame](/blog/2023-11-01_and-there-is-light/images/i_15_Temporarily-soldering-the-actual-cables-to-a-copper-guiding-cable-to-enable-pulling-it-through-the-b_500px.jpg)
![If you look carefully, you can see a piece of copper cable inside the hole](/blog/2023-11-01_and-there-is-light/images/i_13_If-you-look-carefully-you-can-see-a-piece-of-copper-cable-inside-the-hole_500px.jpg)
![Welcome to the dark (country) side... where street lights are a rare sight](/blog/2023-11-01_and-there-is-light/images/i_00_Welcome-to-the-dark-country-side-where-street-lights-are-a-rare-sight_500px.jpg)
![Using a tweezer I eventually succeeded in guiding the wire through the tiny holes in my front fork](/blog/2023-11-01_and-there-is-light/images/i_09_Using-a-tweezer-I-eventually-succeeded-in-guiding-the-wire-through-the-tiny-holes-in-my-front-fork_500px.jpg)
![Use a thin layer of tape to temporarily join the individual leads - making it easier to guide the cable](/blog/2023-11-01_and-there-is-light/images/i_10_Use-a-thin-layer-of-tape-to-temporarily-join-the-individual-leads-making-it-easier-to-guide-the-cabl_500px.jpg)